Rosehip syrup recipe step by step with photo.
- National cuisine: European cuisine
- Dish type: Conservation
- Recipe Difficulty: Very simple recipe
- Preparation time: 10 min
- Time for preparing: 30 minutes
- Servings: 4 servings
- Amount of calories: 277 kilocalories
- Reason: Fasting, dessert
I saw rosehip syrup in the order table and immediately set fire to make it. After all, it is not only tasty, but also healthy - rose hips (according to some sources) contain 5-10 times more vitamin C than blackcurrants, and besides, 40 times more than lemons.
The beneficial properties of rose hips are manifested in its ability to cleanse the circulatory system and improve metabolism. It is rich in many vitamins, and is also widely used for scurvy, anemia, diseases of the liver, kidneys and bladder.
Rosehip is used as a general strengthening and tonic natural remedy. It helps to weaken the development of atherosclerosis, increases the body's resistance to infectious diseases and as a vitamin remedy.
Nevertheless, despite the mass of various recipes for making rosehip syrup (of which I had a chance to study a lot), I did not like 1. The fact is that I wanted to keep as many useful substances as possible in the finished product.
By the way, the most heated debate in the vastness of the worldwide network arises about the temperature, when the amount of vitamin C begins to decline. There is no consensus - but in general, it is not the temperature that matters, but the duration of the heat treatment of the fruit. For those who are interested, please read.
So, a number of the proposed recipes assumed a long (at least 0.5 hour, or even longer) boiling of the prepared mass, which obviously would not have a particularly positive effect on the healing qualities of the syrup. In addition, some additionally suggested using the pulp of the fruit - but my children would clearly refuse to drink such a syrup.
So I decided to make rosehip syrup according to my own recipe, taking as a basis only the number of ingredients used. The syrup turned out to be delicious, sweet, but it is difficult to say by its usefulness whether there is a lot of healing in it. I hope there is at least some left. Now I keep it in the refrigerator and give the whole family 1 spoon a day.
Ingredients for 4 servings
- Water 700 ml
- Sugar 400 g
- Rosehip 400 g
step by step
- To prepare rosehip syrup, we need mature rosehips, water and sugar.
- Rose hips must be pre-treated: rinse, and then cut off the legs and pull out the sepals.
- Now you need to boil 500 ml of water (of the total volume) and pour it over the fruits. Let the rose hips brew a little - about 10 minutes.
- After that, grind the fruits with the help of a pusher and let the mass stand a little more (10 minutes).
- Meanwhile, prepare the rich sugar syrup. To do this, combine sugar and the remaining (200 ml) water in a saucepan. Cook everything for about 10 minutes over low heat - the syrup begins to thicken very quickly.
- We filter the mass with rose hips through a sieve, squeezing out the liquid.
- It turns out here is such a decoction.
- The syrup has boiled down and is still boiling - turn off the fire.
- Pour the broth into the syrup, mix.
- Immediately, while hot, pour the rosehip syrup into pre-prepared jars and roll them up.
- In total, I got 3 jars of syrup - 0.5 l and 2 jars of 200 ml. Let it cool and then store the syrup in the refrigerator. Every day we take 1 tablespoon, children - 1 teaspoon (teenagers - 1 dessert).
Turquoise color can be easily obtained by mixing paints. By definition, turquoise is a shade of blue and green, an aqua color close to cyan. There are a number of ways to get the turquoise color, they will depend on the result the artist wants.
Turquoise color in nature, its meaning
Turquoise is one of the most beautiful shades, it is widely distributed in the surrounding world. This tone can be seen on the sea near the resort shores, the water is colored turquoise in the area of \u200b\u200bsea lagoons, various oases and water quarries. Different shades of turquoise are observed in the sky in the early hours of the morning. This color is not present in the main palette, it must be obtained by combining paints.
Psychologists call turquoise cold, mysterious, although people associate it with intimate conversations with friends. In the countries of the East, color symbolizes faith, healing, compassion, and in Europe it used to be considered a talisman that gives good luck.
Alternative medicine uses turquoise in color therapy: this shade is good for the eyes, can strengthen the immune system, reduces the risk of congestion, depression and stress. It is believed that this tone is very harmonious, designed to add calmness, balance to a person, helps to control emotions.
Getting a turquoise hue
It is not difficult to make a turquoise color with your own hands. To do this, you can use gouache, watercolor, acrylic paints, you just need to mix them in certain proportions. Since turquoise is a mixture of green with a drop of blue, these two basic tones will be required to prepare the paint.
There is no clear instruction on the number of colors. The search is a creative process where paint standards are selected individually. For work you need:
- white palette or plate;
- brushes;
- a glass of water;
- paper.
You should take a sufficient amount of greenery for work that does not have impurities, and then add blue dropwise. follows after the introduction of each new portion of the material. In any case, the amount of blue paint should be less than green. If a color seems appropriate, it should be tried out. To do this, make a smear on paper - a uniform turquoise tone should remain on it.
There are various shades of turquoise - sea wave, azure, blue-green, as well as exotic for the hearing of beginners curacao, aquamarine, the color of thrush eggs and others. It is worth considering the manufacturing process of the most popular turquoise halftones in more detail.
light turquoise
To create a lighter tone, you will need not blue, but blue paint. It is made by the simplest method - a little white is added to the desired degree of clarification. Then they begin to gradually introduce a blue tone into green, until a gentle turquoise hue begins to “loom”. Also, professionals often introduce a drop of yellow paint into the mixture - it gives brightness and lightness to greenery, makes it light green, so the finished turquoise will be airy, very beautiful. If the finished tone seems not tender enough, it can be diluted with any amount of white paint up to a pastel shade.
When light turquoise still needs to be “cooled”, a little gray paint can be added to the finished color scheme. That is, they mix green, blue, white and gray tones. The result is an unusual muted color, perfect for drawing pictures of the sky.
Dark turquoise
Dark tones of turquoise are also easy to make yourself. To do this, you should purchase cyan paint, which already has a green tinge with a blue tint (sold in an artist's store). You need to put a little of this paint on the palette, then add the usual green color scheme in small portions. A dark turquoise color is obtained by introducing a small amount of greens, while thorough mixing is very important. Some experts add a little brown to darken the tone even more, this color will be a little warmer than regular turquoise.
Aquamarine
Marine color is obtained in a similar way. It will require two standard colors - blue and green - in approximately equal proportions. They are mixed until smooth, then a tiny amount of white paint is introduced for some clarification. Depending on the amount of white, the color of the sea wave will change from saturated to paler. For professionals, a mixture of blue phthalocyanine and titanium dioxide is called sea color, but for the layman, ordinary (classic) gouache from the store is quite suitable.
Color ratio table for turquoise
Turquoise cannot be seen in the spectrum of primary colors, there are only basic tones. But by mechanical mixing of paints, almost any desired color can be made. Here is a table with data that will help you navigate the variety of shades of turquoise:
Even a schoolboy can make the shade in question. Experiments will help to create an original color - for this you need only paints, brushes, a palette and a little imagination!
Turquoise
Turquoise is something between blue and white. Although turquoise comes in different shades. Sometimes there is still a greenish tint in it, but in the photo that I took, green is not felt, although it is present in the brightness components. Therefore, try mixing white and blue colors in different proportions, plus you can add a little more green.
I decided to check what brightness this color consists of, taking a color sample from 3, different lighting, places, and this is what I got:
If you don’t have turquoise in your palette, then getting it is not difficult. To do this, mix white, blue and green paint. But keep in mind that you need to constantly experiment to get the right color.
The turquoise color is very beautiful, it is obtained by combining three colors, blue, plus white and plus green. Although you can probably get by with two colors, for example, if you use blue and light green.
To get a turquoise color, you need to take white paint and mix it with blue. If you add green, you get a sea wave. For some reason, many people confuse this color with turquoise. Turquoise is obtained by mixing titanium dioxide and phthalocyanine blue pigments. If we take titanium dioxide, blue phthalocyanine and add green phthalocyanine, we get a sea wave.
Turquoise color consists of green-blue shades. And in order to get this color by mixing paints, first you need to combine blue and white colors with each other, you get blue. and then slowly add green paint to this mixture, but the main thing here is not to overdo it.
If the color turned out to be too dense, then you can dilute it a little with some water; this method is perfect for watercolor.
Usually turquoise color is obtained from three colors: green, blue and white. If you're painting with watercolors, try mixing your paints with a brush on a clean piece of paper. If preparing paint for painting a house or a fence, add one paint to another and stir until an even color is obtained.
Turquoise is not a primary color, so it is usually obtained by mixing green and blue paint. In order to adjust the intensity of the turquoise color, the paint can be diluted with water or white paint can be added. Or use light green paint.
You need to experiment with paints to get the right color, so you can try to go the simplest way and try mixing blue paint and green paint to achieve the desired color.
But the best option is to add a little bit of blue-green to the yellow-green paint, correcting it with white paint.
Turquoise, named after the stone, is a shade of blue that can be seen in some bodies of water. Shades of turquoise are also naturally visible during the northern and southern auroras. Since turquoise is not a primary color, artists mix blue and green to create this striking hue.
To obtain turquoise, which in nature has a stone called turquoise, we will need several different colors: green and blue.
There are several shades of turquoise: light green (aquamarine) and sky blue.
Turquoise is the color of peace of mind.
duplicate blue, plus white and plus green
Usually there is no turquoise color in the palette and it can be obtained by mixing paints of other colors.
The diagram below says how many percent you need to take one or another color of paint to get a turquoise color. And it can be both bright and muted.
Turquoise color carries a mixture of blue and green colors and everything depends only on their taken proportion.
In order to get a pure turquoise color, you must take a certain amount of blue paint onto the palette, and after that green paint begins to be introduced into it.
It all depends on what kind of color you want to get, focus on the percentage of colors to get the desired result.
Turquoise color, which includes all shades of natural turquoise stone, is a mixture of green and blue colors. The shade of turquoise depends on the ratio of these colors: from sky blue (the color of curacao) to a light green shade of the sea wave (aquamarine). This color is considered the coldest in the spectrum of colors, so it has a calming effect on a person. This effect is used in the design of interiors in which it is necessary to create a peaceful, relaxing atmosphere. The incredibly beautiful color of precious turquoise also looks good in clothes, blending perfectly with natural skin tones.
You will need
blue paint;
- green paint;
- palette;
- brush or palette knife.
Sponsored by P&G Placement Related Articles "How to Get Turquoise" How to Mix Paint Colors How to Wrap Flowers How to Weave a Wide Beaded Bracelet
Instruction
To get a turquoise color, take blue and green paints. These should be pure shades of both colors, as close as possible to the samples on the standard color wheel. Unlike shades of blue, turquoise shades are not just lighter than blue - they are directly related to green.
Take some blue paint on the palette and start adding green to it little by little. Depending on what kind of shade - bluish or greenish - you intend to get, keep mixing these two colors until you achieve the desired result.
The range of shades of turquoise is quite large: it can be both soft, muted, pastel, and bright, juicy colors. The brightness of the color is achieved by using pure undiluted paints that make up the color. To get pastel turquoise shades, add a little white to the color obtained on the palette. By varying their number, you can get colors of varying degrees of brightness. You can also muffle the bright glow of turquoise by adding a small amount of gray paint. The color will acquire no less noble sound.
If you work with water-soluble paints such as watercolors or gouache, then you can also achieve a variety of shades by using turquoise diluted with water. By applying paint on white paper with a loose, transparent layer, you can get lighter shades of turquoise.
From the nature around us - the most ingenious Artist - we can learn the harmonious combination of different colors. Turquoise color includes all shades of water. And the natural companion of water in nature is sand. Therefore, turquoise tones look most harmonious with various shades of sand and earth - brick, bright coral, golden ocher, grayish sandy, coffee and many others.
How simple
Other related news:
Roses (Rosa canina) flower buds and petals are considered to be the natural reference color for pink. From the name of this plant came the name of the color. This color is not in the primary color palette, but it can be easily obtained. You will need - a palette for mixing paints; - paints; -
It is located between green and blue.
It comes in many variations. It includes both soft and bright, intense colors. If you can’t find ready-made paint, you will have to mix green and blue yourself. As a result, we will get the desired shade. If you try to briefly answer the question of what colors to mix to get turquoise, it should be noted that you have to use cyan blue and less green. We will discuss in more detail in this article.
Color selection
So, we need, How to get it in practice, now we will describe in detail. First you need to decide on the desired shade. The word "turquoise" most often refers to a mixture of green and blue with a predominance of the first. However, we can achieve different shades.
It's easy to add a drop of light gray or white paint. As a result, we get a more delicate shade. You can also mix rich blue, green and yellow. As a result, we get a bright turquoise. It remains to choose between a bright or soft shade.
The foundation
So, earlier we already managed to get the turquoise color. How to get it in other ways, we will consider further. We have already figured out that we will need blue and green paint. Their basis can be any water, oil, acrylic.
However, it should be remembered that the same type of paint mixes better. It is best to buy everything you need in one of the specialized stores for artists. In this case, you should study the entire range presented. It may be possible to find the desired shade in finished form.
Watercolor
How to get a turquoise color when mixing paints, we already know: we need yellow, green and However, it is better to take them in a small drop in order to achieve extreme accuracy when creating the required paint. If you are an aspiring artist, it is better to give preference to watercolor. This type of paint is easy to handle. Plus, they mix really well. Watercolors are usually sold in small tubes. For pale shades, yellow paint is suitable.
Water and space
If you're wondering how to get turquoise mixed together to be more muted, mix green and blue with white. Suppose the picture is a tropical beach, then we use a warm cream as the basis for transferring the image of sea water onto paper.
A purer white would be suitable for creating a picture of a distant cold turquoise planet. Let's use shades of blue, which is close to the green spectrum. You can try ultramarine, azure, cobalt, cyan or any other similar option. The main thing is that it should be closer to green than purple.
Any pigment in itself contains a small amount of other colors. Thus, paint of an arbitrary shade will mix well with another color. In practice, this is very convenient.
Saturated color
So, to solve the question of how to get a turquoise color when mixing paints, blue and are used. However, you can achieve an even better result. For this we will use blue paint containing green pigments. It is impossible to find a "pure" basis.
In particular, this applies to blue. In theory, it should give a good green with yellow, and a great purple with red. In practice, these lines are blurred. The fact is that blue always approaches red or green due to the imperfect chemical purity of each pigment.
To obtain an extremely saturated color, we take the necessary ingredients. We are talking about the already familiar to us blue and green shades.
- We apply a small amount of cyan paint to the edge of the palette. In this case, it should be blue-green.
- Let's move on to the next step. Place some green paint next to it. If not, you can get this color yourself. To do this, mix an equal amount of yellow and blue. Instead of a palette, any clean, dry surface will do. However, an item that is used in this way can no longer be used for anything else.
- We mix blue and green in a ratio of 2: 1. The first pigment should be more. You can also experiment with proportions, but it is better to use the ratio given as a sample. A little more green paint will give a rich shade of sea wave. If we reduce the amount of green, we get a subtle turquoise. It will approach blue.
So we figured out what elements the turquoise color consists of. How to get it is detailed above.
One of the most beautiful colors on earth is turquoise. It strikes with its piercing and beauty, incomparable with any other color. In common people it is called the color of the sea wave. Turquoise is a very fashionable color, it is used in the interior, clothes and much more. Widespread in home interiors, but do not overdo it, as you can achieve an unsatisfactory result, it is better to harmonize it with various shades of other colors. Turquoise color in any interior brings only positive emotions.
He has always commanded respect from people engaged in public service and hard mental work, as he has the ability to assist in making the right decisions. Turquoise was considered the imperial stone of ancient Egypt, and after death, their tombs were trimmed with turquoise. Turquoise color is made up of several shades: green-blue and blue. The color of turquoise belongs to cool colors, but compared to other colors of the same group, it is the warmest. Like many other colors, turquoise has its own meaning and effect on people. This color brings a feeling of freshness and natural purity.
Turquoise color has a very strong effect on a person, is able to relieve irritability and fatigue. The difference in its shades is wide - from soft turquoise to deep blue-green. Turquoise color is used in the design of health-improving spas, massage rooms. Usually it is combined with white. This is not surprising, since it, like no other, gives a feeling of calm and relaxation. Doctors have identified its significant impact on recovery in rehabilitation centers.
In addition, doctors advise most of the time to be in his environment in order to achieve the best result. So how do you get turquoise? To do this, you need to mix several paints of different colors. You can get turquoise shades if you take blue or blue-green paint by mixing it with white. To make turquoise at home, you will need paints with blue and green. It is desirable that these be the purest shades, close to the typical color wheel samples. You need to take a small amount of blue paint and mix in a little green.
It all depends on the artist, what shade he wants to have in the end, bluish or greenish, you just need to keep adding green to get the desired result. In order to make the maximum brightness of the color, it is necessary to use undiluted paint palettes. In many ways, the color depends on the paints used, it is preferable to use watercolors and gouache paints, since only they are able to more accurately convey the brightness of the turquoise color. It is not difficult, and everyone can afford to make and use this most beautiful color. You need to try and experiment, draw and enjoy the beautiful.
Artists often use this tone to depict nature paintings. It is called the color of coolness, the morning sky and sea water. Since it is absent in ordinary palettes, we will tell you in detail how to get a turquoise color when mixing paints.
Proportions
This color is somewhere between green and blue. Moreover, the first tone is predominant. To get a classic turquoise, you need to mix the colors in the following proportions:
- cyan blue 100%;
- classic green 10%.
For highlighting, white paint is required. You can darken the final result using black color. If the resulting tone needs to be "cooled", a little gray is added. To obtain some shades, a little yellow or cream is added to turquoise. They should be no more than 1/6 of the total mass.
To see if you can achieve the desired color, take a brush and apply paint to paper or another surface. Keep in mind that watercolors and acrylics always lighten after drying, while oil paints, on the contrary, darken a little.
shades of turquoise
This tone, like any other, has many shades. They can vary from delicate light green with a slight blueness, pastel to rich bright:
- pale turquoise: obtained by adding 5% white;
- cyan: very close to blue, to achieve it, you need to take 100% blue and a small amount (10%) green;
- emerald-turquoise: there is a little more green in it; to get an emerald turquoise color, you must also add yellow and white;
- sea wave: you need 100% green, 50% blue and a little (10%) white;
- robin eggs, a transitional between turquoise and mint, often called Tiffany's color, can be obtained by taking 2 parts blue and a little less (1 part) green.
Artists love to give this tone the most exotic names. There are colors of curacao, Florin springs, Atlantis, a waterfall, and even the color of thrush eggs. Experiment and you. Perhaps you can create a new, unusual shade.
What colors go with
It harmonizes with both cold and warm colors. In the classic version, it refers to cold. But you can also make the turquoise color warm if you add a little yellow to it.
Its lightest, pastel tone is undesirable to use in large quantities. This can give a feeling of sterility. It is not for nothing that in recent years, the clothes of medical workers have been replaced from white to him.
A classic pair is a combination of turquoise and white. After all, it looks very advantageous against a white background. You can soften turquoise and reduce the degree of coolness with milky beige.
Combining it with red is considered controversial. After all, they are both too sharp. For balance, white is usually added to this pair. Its combination with orange gives the same contrast. But it is better to combine this tone not with orange, but with yellow. The result is a cheerful, energizing set.
You can also combine turquoise with a related blue. To do this, it is better to choose the brightest tone of blue - ultramarine. An exotic, but rather original pair is turquoise and brown (chocolate). The result is more subdued, close to conservative.
So, we figured out what colors to mix to get the turquoise color and its shades. You can experiment and try to get a new tone by giving it any poetic name. Good luck!